Nordson ProBlue Flex Manual page 35

Item Component
System Status LED
(fault)
1
System Status LED
(alert)
2
Heated Zone
3
Heated Zone
E 2020 Nordson Corporation
1
Tank
Manifold
Hose 1
Applicator 1
LED/ Icon Description
The System status indicator will change to Red, indicating
a Fault condition.
The System status indicator will change to Yellow,
indicating an Alert condition.
Indicates
!
!
Indicates
NOTES:
S
In most cases, you have approximately 2 minutes to resolve an Alert
condition before the heated zone changes to a Fault condition. When a
Fault condition occurs, both the Master Heater and Pump controls
automatically switch OFF.
S
Press on the OLED panel to clear and reset any zone Alert or
Fault conditions.
S
Select Event Log to view all melter events (alerts, faults, parameter
changes, etc.) in the order they occurred, with the most recent on top.
S
Refer to the Troubleshooting section for more information.
OLED User Interface
2
177 C
177 C
!
440 C
! 490 C
3
a Fault
condition.
an Alert
condition.
29
Part 1128351_02