Managing Heated Zones; Enabling/Disabling And Changing Zone Set Point Temperatures - Nordson ProBlue Flex Manual

28
OLED User Interface

Managing Heated Zones

Temperature
Tank
Manifold
Hose 1
Applicator 1
Enable/Disable
Set Point
Part 1128351_02
There are two types of heated zones:
S
Internal Zones: Tank and the manifold
S
External Zones: Connected hoses and applicators
Enabling/Disabling and Changing Zone Set Point
Temperatures
1. Navigate and select the zone you want to enable/disable or change its
set point temperature and press > on the Navigation pad.
2. Do the following to continue:
S
To Enable/Disable an external zone - Press the
to toggle the zone to Enable or Disable. When done, press the < on the
Navigation pad to return to the previous screen.
S
To change the set point temperature, press the Up/Down keys on the
Navigation pad to select the zone you want to change its set point
temperature, then press > and enter the set point temperature you want.
When done, press the
Zone
Internal Zones
External Zones
NOTES:
S
By default, internal zones are enabled, and all external zones are
disabled.
S
Select Global Set Point to make all zones (enabled or disabled) the
same set point temperature.
S
Internal zones (tank and manifold) cannot be disabled. You can only
change their set point temperatures.
S
Although there are two internal zones (tank and manifold), changing one
internal zone automatically changes the other. You cannot have two
different internal zone set point temperatures.
ü
.
Default Minimum
177_ C 40_ C
_
(351 F) (100_ F)
177_ C 40 _ C
(351_ F) (100_ F)
ü
on the Navigation pad
Maximum
204_ C
(400_ F)
232_ C
(450_ F)
E 2020 Nordson Corporation