Backing Up And Restoring The Melter - Nordson ProBlue Flex Manual

96
OLED User Interface

Backing Up and Restoring the Melter

Tools
Backup/Restore/Reset
Backup
Restore
Part 1128351_02
Backups are saved to a .NOR file (time and date stamp in the file name) to a
/backup folder on the USB drive. If the folder does not exist, the system will
automatically create it. The following is backed up:
S
Current version of software/firmware and settings
S
Melter ID
S
Network Settings
S
Licensing
S
Language preference
NOTES:
S
When transferring files between the melter and BBconn Cloud, the USB
drive must be formatted using FAT or FAT32. No other format, such as
NTFS and exFAT are supported.
S
Licensing and WiFi settings are restored, but only If serial number AND
the Unique ID of the unit matches the backup file.
S
The following is NOT restored:
S
Machine name
S
Tank level calibration
S
Logs, reports and history
S
Auto-tuned zones
1. Make sure you have a USB drive properly inserted in the USB port.
NOTE: If you have a .DAT file used for upgrading/downgrading you will be
prompted if you want to upgrade. Press
message disappear
2. Select what you want to do, Backup or Restore, then press the
Navigation pad to start. When done, a confirmation message briefly
appears.
3. When done, press
return to the Tools menu.
NOTE:
S
When transferring files between the melter and BBconn Cloud, the
USB drive must be formatted using FAT or FAT32. No other format,
such as NTFS and exFAT are supported.
ü
on the Navigation pad to make the
to return to the Home screen, or press < to
ü
on the
E 2020 Nordson Corporation