Accessing The Graphical User Interface - Nordson ProBlue Flex Manual

88
OLED User Interface
System Settings
Networking
Part 1128351_02
Option Description
Type of security, if
Security any, you want to
Mode
Password Enter password
WiFi On Enable/Disable the
WiFi module
SSID Enable/Disable
whether the WiFi
Broadcast
On module broadcasts
its SSID or not,
when module is
3. When done, press < to return to the Network Settings menu or
return to the Home screen.

Accessing the Graphical User Interface

You can access the ProBlue Flex graphical user interface if you have:
S
A Nordson Touch Screen (Web Server license is included when you
purchase the touch screen from Nordson, otherwise you will need to
purchase a Web Server license from Nordson.)
S
Most any laptop or device that is WiFi enabled. You must purchase
the WiFi kit from Nordson, which includes a Web Server license. You
can also connect your laptop directly to the melter with an Ethernet
cable and running Chrome. You must purchase a Web Server license
from Nordson.
Default
WPA
/PSK
use
Enabled
entirely
Enabled
turned on
Notes
Select Open if you do not
want to enforce any
network access to this
melter.
You can change the
password using BBConn
Cloud or from the touch
screen version.
The Indicator is located
in the upper right-hand
corner of the front panel
The Wifi indicator is:
S
On when at least
one person is
currently connected
S
Off when Wifi is
either not installed or
installed, but
disabled
S
Flashing when
enabled, but nobody
is connected
to
E 2020 Nordson Corporation