Adhesive Storage Bin; Air Pressure Regulator/Solenoid Assembly - Nordson Mesa Fulfill Customer Product Manual

14 
Fulfill Retrofit for Mesat Melters
Pneumatic & Mechanical Components
1
3
Figure 3
Assembled Mesa Fulfill retrofit assembly.
Part 1121938_02
Refer to Figure 3 as you learn about the components of the Mesa Fulfill
retrofit assembly.

(1). Adhesive Storage Bin

Place adhesive in the adhesive storage bin. The bin contains a gasket that
prevents debris from entering the bin. For best results, break up the
adhesive as much as possible when emptying into the bin. Do not get the
adhesive wet.

(2). Air Pressure Regulator/Solenoid Assembly

The supplied air pressure regulator is permanently set at 65 psig, the optimal
setting for most adhesives.
The solenoid valve turns on after the sensor indicates level state and the time
delay has been reached. The solenoid directs compressed air to flow to the
suction lance.
4
5
2
E 2013 Nordson Corporation
6