Manitowoc Grove CD3340B Service Manual page 245

CD3340B/YB4411
P0644
3. Lubricate the bushing and lips of the ring seal. Install the
U-joint inside the axle beam (Figure 8-117).
NOTE: Be careful not to damage the ring seal.
P0645
Wheel Hub Assembly
1. Install the bushing into the swivel housing with SPECIAL
T O O L P / N 1 9 0 1 7 6 6 a n d a h a m m e r o r p r e s s
(Figure 8-118).
Fill 3/4 of the ring seal cavity with grease. Apply sealing
compound on the outer metallic surface of the ring seal.
Install the ring seal into the swivel housing with
SPECIAL TOOL P/N 1901767 and a hammer.
GROVE
AXLES/DRIVE SHAFTS/WHEELS AND TIRES
P0646
FIGURE 8-116
2. Grease the inside of the kingpin cavities of the swivel
housing.
Place a shim under the Belleville washer and install this
assembly in each kingpin cavity (Figure 8-119).
NOTE:
FIGURE 8-117
P0647
3. Place the lower kingpin on a workbench and install the
bearing cone (Figure 8-120) with SPECIAL TOOL P/N
1901781, using a press.
A0717
Published 04/07/2015 Control # 569-00
Be sure the shim is under the Belleville washer.
FIGURE 8-118
FIGURE 8-119
8
FIGURE 8-120
8-29