Modify System Values; Customizing The User Name, Password; Creating A Read-Only User Name, Password; Customizing System Configurations - ATTO Technology FastStream VT 5700 Installation And Operation Manual

Default values are appropriate for most configurations, but may be modified for your needs using the ExpressNAV
VTL manager.

Customizing the user name, password

It is best practice to change the default user name and
password. Refer to the CLI commands
PartitionWriteCache on page xvii of the Appendix and
Username on page xxii of the Appendix.
1 Open a CLI session either using Telnet or the
serial port as described in
page 33.
2 Type set Username [user name]
3 Press Enter.

Creating a read-only user name, password

You may wish to set up a read-only user name and
password to prevent changes to storage and
FastStream VT settings. Refer to the CLI command
ReadOnlyUsername on page xviii of the Appendix
1 Open a Command Line Interface session either
using Telnet or the serial port as described in
Interface Options on page 33.
2 Type set ReadOnlyUsername [name]

Customizing system configurations

You may change several parameters using the
System Configuration page of the ExpressNAV
VTL manager.
1 If you are not already in the ExpressNAV VTL
Manager, type the IP address of your appliance
in a standard browser. On the splash screen,
click Enter Here. In the box provided , type in
your user name and password, and click OK .
If you have already created a VTL or initialized
drives, the Monitor VTL page appears. In the
left menu, click Manage , then click the
FastStream VT arrow.
If you have not yet created a VTL or initialized
drives, the Initial Setup page appears.
13
ATTO Technology Inc. FastStream VT Installation and Operation Manual

5.0 Modify System Values

Interface Options on
4 Type set Password
Note
The user name is case insensitive and
password is case sensitive.
5 Press Enter.
6 Follow the instructions on the screen to confirm
your old and new password.
The user name and password for all user interface
sessions are changed.
3 Press Enter.
4 Type set ReadOnlyPassword
5 Press Enter
6 Follow the instructions on the screen to confirm
the read-only password.
The read-only user name and read-only password for
all user interface sessions are changed.
2 Select System Configuration .
3 Click Next .
4 Select the items you wish to change and type in
text boxes as required. A choice may be greyed
because it is not available based on a previous
choice.
• Appliance name: give this FastStream VT a
name which is significant to you if you are
managing several ATTO devices from a
single workstation.