Manage Atto Devices; Creating A Unique Name For Your Faststream; Discovering, Managing Other Atto Devices - ATTO Technology FastStream VT 5700 Installation And Operation Manual
Fibre channel to fibre channel virtual tape appliance
Hide thumbs
Also See for FastStream VT 5700:
- Technical specifications (2 pages) ,
- Selection manual (1 page) ,
- Comparison chart (1 page)
Table of Contents
Advertisement
You may manage other ATTO devices from your current browser using the ExpressNAV VTL Manager.
If you have other ATTO devices in the same broadcast
domain with no routers between them, and any
switches between this FastStream and the other
devices are configured to forward UDP broadcast
messages, you may physically identify these devices
Creating a unique name for your FastStream
You may wish to name your FastStream if you are
going to manage several ATTO devices from one
browser.
1
If you are not already in the ExpressNAV VTL
Manager, type the IP address of your
FastStream in a standard browser. On the
splash screen, click Enter Here. In the box
provided , type in your user name and
password, and click OK .
2
The VTL Monitor page appears. In the left-
menu, click Manage on the left side of the
screen.
Discovering, managing other ATTO devices
1
Follow steps 1-3 in
your FastStream
above.
2
Select Find ATTO Devices .
3
Click Next.
4
Click Rescan .
5
Select a device from the list. An arrow points to
the appliance you are currently using.
31
ATTO Technology Inc. FastStream SC Installation and Operation Manual
8.0 Manage ATTO Devices
Creating a unique name for
and manage them from within the browser you are
currently using.
It is best practice to give your current FastStream a
recognizable name so that you can distinguish it more
easily from among other ATTO devices.
3
Click the Other Devices arrow.
4
In the Other Devices menu, select Set
Appliance Name.
5
Click Next.
6
The System Configuration page appears.
Type in a name for your appliance in the text
box provided.
7
Click Commit. The name you typed appears in
the upper right corner of the screen under the
ATTO FastStream VT banner.
6
Select Identify to activate a blinking LED on the
selected product. Select the listed device again
to stop the blinking LED.
7
Select the device from the list.
8
Select Launch in Browser to view the device's
management console.
Advertisement
Table of Contents
