ATTO Technology FastStream VT 5700 Installation And Operation Manual page 19

• Time and Date: refer to Timeand
on page xxii and Date
Appendix.
• Fibre Channel data rate and connection
mode for each Fibre Channel port: refer to
FCDataRate on page xv and
on page xv of the Appendix.
• Enable or disable hard address assignment:
refer to FCHard on page xv of the Appendix.
• Establish access through FC ports: refer to
FCMultiNode on page xv of the Appendix.
TimeZone
on page xiii of the
FCConnMode
• Change the Ethernet management port
configuration: refer to IPDHCP,
IPDNSServer, IPGateway,
and IPAddress on page xvi of the Appendix.
5 When you have completed your changes, click
Commit .
6 A warning box appears. If you wish to keep the
changes you made on the page, select Yes and
the FastStream restarts to save the changes.
7 If you selected No or when the firmware
completes its power cycle, the System
Configuration page appears.
IPSubnetMask
14