ATTO Technology FastStream VT 5700 Installation And Operation Manual page 16

6 Select Yes, Assign a Hot Spare if you want a
Hot Spare.
7 In Step 3 , click System Scan to discover the
drives available for VTL configuration.
8 When the scanned drives box is populated,
select the drives to be used for the underlying
RAID group associated with the VTL. The
Minimum Number Additional Drives
Required label lists the number of drives you
must add to fulfill the RAID level and Hot Spare
requirements you have selected.
9 Answer the questions in Step 4 to define your
virtual storage as if it were a physical tape
storage array based on the needs of your ISV.
You may select a library to emulate or select
Custom to define your own setup.
• If you select a library, default values for that
library are entered into the fields in the rest
of Step 4 and in Step 5 .
11
ATTO Technology Inc. FastStream VT Installation and Operation Manual
• If you select Custom , you must complete
the fields in Step 4 and Step 5 on the
screen. However, some fields may be
populated automatically for you depending
on your system.
10 When you have completed your choices, click
Next .
11 The Virtual Tape Library Setup page appears.
If the new configuration is the way you want it,
click Commit.
12 In the warning box, verify that you want to add
the VTL by selecting Yes .
Selecting No returns you to the Virtual Tape
Library Setup page and you can choose to
begin this procedure again.
13 The Virtual Tape Library Setup page appears.
Select Done if you do not want to create
another VTL.
Select Configure Another to create another
VTL.