Cli Error Messages - ATTO Technology FastStream VT 5700 Installation And Operation Manual

Designation
GroupName
mp1
PartitionIndex

CLI error messages

The following error messages may be returned by the Command line Interface
ERROR. Invalid Command. Type 'Help' for
command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID Member index
CLI summary
The following chart summarizes the Command Line Interface commands, their defaults, and an example of how
to enter the commands. Commands which have no default values have a blank entry in that column of the table.
CAUTION CAUTION
Do not use CLI unless you are directed to
by an ATTO technician. Changing
parameters may cause loss of data and/or
disruption to performance and reliability of
the FastStream. The ExpressNAV VTL
manager is the preferred method to
manage the FastStream VT.
Command
AutoMap
AutoResume
BlockDevClean
BlockDevIdentify
BlockDevIDStop
BlockDevScan
BootDelay
BridgeModel
BridgeName
Indicates
The name of the RAID group, designated by the user, to which a block
device is assigned. Use
names
Ethernet port used to manage the FastStream
Index designation of a partition as found by using the
command
Default
initialize = enabled
rebuild = enabled
erase = disabled
5
" "
RGDiskWriteCache
ERROR Maximum number of RAID Groups
exceeded
ERROR Insufficient number of RAID Group
members
ERROR
Block Device at specified index no longer
available
ERROR Insufficient RAID Group members for
RAID type
Example
automap
set autoresume all disabled
blockdevclean 30
blockdevidentify alpha 3
blockdevidstop
blockdevscan
set bootdelay 25
get bridgemodel
set bridgename Omega6
to discover RAID group
PartitionDisplay
viii