System Setup Options; Change Mapping; Change The Current User Name, Password; Create A Read Only Password Or User Name - ATTO Technology 1500D Installation And Operation Manual

Default values are appropriate for most configurations, but may be modified for your needs using ATTO
ExpressNAV. This chapter summarizes some of the specialized configurations you may want to use.
Default values are appropriate for most
configurations, but may be modified for your
needs using ATTO ExpressNAV. Refer to
ExpressNAV pages on page 31 for a description
of the various parameters available for
configuration
Note
If you have completed configuration
operations at any time and have clicked
Submit on the page you are viewing, go to the
Restart page and restart the iPBridge to save
the settings. If you have not completed
configuration changes, go on to the next
command.
It is best practice to change the user name and
password.

Change mapping

If you wish to change the mapping of devices
which took place automatically when you
powered up the iPBridge 1500/1550, use the
ExpressNAV interface to map devices. Refer to
Target management on page 13.

Change the current user name, password

1 If you have not already, open an ExpressNAV
session. For instructions, refer to
ExpressNAV session
2 Click Bridge.
The Bridge Configuration page is displayed.
The user name that you are currently logged in
with is displayed in the Username text box.
3 Enter appropriate information into the
Username, Current Password, Old
Password, New Password, and Confirm
Password text boxes.
Note
The user name is case insensitive and
password is case sensitive.
4 Click Submit.
19
ATTO Technology Inc. iPBridge Installation and Operation Manual

2.2 System setup options

Opening an
on page 29
5 The user name and password for all Telnet,
FTP and ATTO ExpressNAV sessions are
changed.

Create a read only password or user name

You may set a read only password or a read only
user name. Refer to General use commands
page 39.
1 If you have not already, open an ExpressNAV
session. For instructions, refer to
ExpressNAV session
2 Click Bridge.
The Bridge Configuration page is displayed.
The user name that you are currently logged in
with is displayed in the Username text box.
3 Enter the Admin password in the first line of the
boxed area.
4 Enter the desired information into the Admin
Username, New Admin Password, Confirm
New Admin Password or New Read Only
Password and Confirm New Read Only
Password text boxes.
The user name is case insensitive and
password is case sensitive.
5 Click Submit.
6 The user name or password for all Telnet, FTP
and ATTO ExpressNAV sessions are changed.

Performance optimization

To provide the optimal performance, use the
ExpressNAV interface to change these settings:
9014
MTU:
enabled
SpeedWrite:
Other settings may already be set to the best
possible mode. Refer to
23 or these options:
Optimize ExpressNAV in Internet Explorer
1 Go to the browser toolbar and select Tools
2 Select Internet Options
3 Select the Security tab
4 Select the Custom Level button.
Opening an
.
on page 29
Troubleshooting on page
on