Interface Options; Using The Expressnav Vtl Manager - ATTO Technology FastStream VT 5700 Installation And Operation Manual

The best way to manage, monitor and configure the FastStream VT is to use the ExpressNAV VTL manager, but
you may use a terminal emulation program or Telnet.
The ExpressNAV VTL manager is the preferred
method to operate and manage the FastStream VT.
However, it may be necessary to use other methods to
access the FastStream VT, such as to change the

Using the ExpressNAV VTL manager

Use the ExpressNAV VTL manager to manage,
monitor and configure the unit. The choices you make
lead you from screen to screen. Choices which are not
available are greyed out.
1 Working from the computer attached to the
FastStream VT Ethernet port, open your
browser and type in the FastStream VT IP
address as noted in
on page 5.
2 Your browser points to the FastStream VT
splash screen. Click Enter here...
33
ATTO Technology Inc. FastStream VT Installation and Operation Manual

9.0 Interface Options

Discovering the IP address
user name and password (refer to
user name, password on page 13).
CAUTION CAUTION
Changing parameters other than those
offered in the ExpressNAV VTL manager
may cause loss of data and/or disruption to
the performance and reliability of the
FastStream.
3 Type in the user name and password values.
Note
The default values are user name: root and
password: Password. The user name is case
insensitive and the password is case sensitive
The pages which next appear depend on whether or
not you have begun configuring the FastStream VT.
Refer to Configure Virtual Tape
Customizing the
on page 9.