Monitor Vtl Page; Health And Status Monitor Page; Configuration Display Page - ATTO Technology FastStream VT 5700 Installation And Operation Manual

Health and Status Monitor page

The Health and Status Monitor provides information
about RAID group status, FastStream VT
environmental status, Ethernet and Fibre Channel
interface states, and drive status, including links to
diagnostics and more detailed information.
1 If you are not already in the ExpressNAV VTL
Manager, type the IP address of your
FastStream in a standard browser. On the
splash screen, click Enter Here. In the box
provided , type in your user name and
password, and click OK .
2 The Monitor VTL page appears. On the menu
at the left side of the page, click Monitor .
3 The Health and Status Monitor page appears.
If you click Details, added information about
each parameter appears on the Configuration
Display page (refer to
page below).
Exhibit 6.0-2 The Health and Status Monitor page.
Configuration Display
• RAID Groups: RAID Group names, RAID
status, available Hot Spares and the
number of Hot Spares which have been
substituted for faulted drives.
• Environmental Status: Temperature and
voltage of the FastStream VT.
• Enclosure Status : Enclosure index, ID and
index number and status. Click Details to go
to the SES Management page.
• Interface Status : Ethernet management
port link status and Fibre Channel port link,
speed and connection mode.
• Drive status by port: Size and status.
4 Click Drive Health. The Drive Performance
and Health page appears. The page may also
be reached by clicking Diagnostics in the left
menu.
5 Click System Scan. The FastStream VT scans
for attached drives and populates the Port 1
Drives and Port 2 Drives sections of the page.
16