Configuring The Fibrebridge; Preliminary Steps; Port Configurations; Modify Passwords - ATTO Technology FibreBridge 2370E Installation And Operation Manual

To configure the ATTO FibreBridge, use ATTO ExpressNAV. Default values are appropriate for most
configurations, but may be modified.The ExpressWizard provides one-button setup for many
applications.
The best way to access the FibreBridge to view
and change settings is to use ATTO ExpressNAV,
a browser-based graphical interface. Other
methods are also available. Refer to
options on page 25.
Help is available from within ExpressNAV for
any page headings displayed in red. For more
information on any of these parameters, refer to
the specific CLI command in
explanations on page vi of the Appendix.
To change mapping, refer to
17.
To use Email notification or SNMP, refer to
Remote monitoring, management
You may make changes to several pages before
going to the Restart page and restarting the
FibreBridge to save the changes.

Preliminary steps

1 If you are not already in
the ExpressNAV
interface, type the IP
address of your Fibre
Bridge in a standard
browser as found in
Using ExpressNAV
page 25, click Enter
Here, type in your user
name and password,
and click OK .
2 The Status page
appears. Choose one of
the following options:
• View all settings to
ensure they are
appropriate for your
configuration.
15
ATTO Technology Inc. FibreBridge Installation and Operation Manual
3.0 Configure the FibreBridge
Interface
Command
Map devices on page
on page 19.
on
• Keep the automatic settings created when
you powered up your Fibre Bridge and do
nothing, accepting all the default settings for
all ports.
• Use the individual pages listed on the side
menu to make changes or use other features
such as Email notification or SNMP as
needed.

Port configurations

1 Follow the Preliminary
2 Click on the port you wish to configure on the
left hand menu: Ethernet, Serial Port, SCSI or
Fibre Channel .
3 Select the parameters you wish to change.
4 Click Submit.
5 If you have completed all changes for this
session, go to the Restart page and restart the
Fibre Bridge.

Modify passwords

1 Follow the Preliminary steps
2 From the side menu select Bridge .
The Bridge Configuration page is displayed.
The Administrator user name that you are
currently logged in with and the current read
only user name, if present, are displayed in
their text boxes.
steps.