Remote System Monitoring; Updating Firmware; Troubleshooting; Interface Options - ATTO Technology iPBridge 2700C Installation And Operation Manual

3.3 Optional changes .................................................................15

4 Remote system monitoring ...............................................................17

5 Updating firmware .............................................................................19

6 Troubleshooting .................................................................................20

7 Interface options ................................................................................27

Preliminary steps
Modify passwords
Set up a VLAN: Virtual Local Area Network
Enhance performance
iSCSI performance configuration tool (Windows only)
SNMP
Email notification
Using ATTO ExpressNAV
Using FTP
Inside out method
Check basic diagnostic tools
Check the host event log
Check the event and trace logs
Visually inspect LEDs
Check for problems on attached devices
Check host versions
Check iPBridge product versions and update firmware
Check components
Check Fibre Channel devices
Check the iPBridge FC ports
Check the serial port
Check iPBridge internal configuration
Check iPBridge Ethernet ports
Check the LAN/WAN
Check the iSCSI Host Adapter or NIC
Check the iSCSI OS driver
Check the Operating System
Performance Issues
Check Fibre Channel devices
Check the iPBridge Ethernet ports
Check the LAN/WAN
Check the Ethernet host adapter or NIC
Check applications
Check the host system
Check the Operating System
Optimize ATTO ExpressNAV in Internet Explorer
Use the ATTO iSCSI performance configuration tool for Windows
Reset/restore factory default
Using ExpressNAV
Opening an ExpressNAV session
Optimizing ExpressNAV in Internet Explorer
Using the serial port
Using Telnet