Scsi Enclosure Services (Ses); Setting Up Ses - ATTO Technology FastStream VT 5700 Installation And Operation Manual

6.3 SCSI Enclosure Services (SES)

Drive enclosures may provide a SCSI Enclosure Processor which indicates enclosure health status, drive
identification and drive fault.
The ATTO FastStream VT recognizes drive
enclosures that provide SCSI Enclosure Services
(SES) information. You may use SES to identify

Setting up SES

1 If you are not already in the ExpressNAV VTL
Manager, type the IP address of your
FastStream in a standard browser. On the
splash screen, click Enter Here. In the box
provided , type in your user name and
password, and click OK .
2 The Monitor VTL page appears. Click Manage
on the left side of the screen.
3 Select Manage Enclosure Services .
4 Click Next. The Enclosure Services page
appears.
5 Select the type of SES monitor and control you
wish to use.
Exhibit 6.3-1 The Enclosure Services page.
23
ATTO Technology Inc. FastStream SC Installation and Operation Manual
individual drives, all the drives in the same enclosure,
all the drives in a single RAID group, or faulted drives.
You may also select drives and monitor the status of
the enclosure.
• Pass-Through : the host application
manages SES information.
• Monitor and Control by the FastStream :
the FastStream VT controls SES services.
• SES Monitoring Disabled : the host
application does not receive any SES
monitoring information.
6 If you have elected to enable enclosure
services, select the amount of time in seconds
that SES enclosures are asked (or polled) for
their current status. The default is 30 seconds:
you may choose an interval up to 60 minutes.
7 If you have elected to enable enclosure
services, and you want the enclosure to sound
an alarm if a drive becomes faulted, select
Enable Faulted Drive Alarm.
8 Choose to test an enclosure's alarm or to mute
alarms. You may also choose to have an
occasional audible reminder of the alarm
condition if it is supported by your enclosure.