Chapter 1: Atto Fibrebridge Services; Atto Fibrebridge Configuration Services; Atto Fibrebridge Maintenance Services; Atto Fibrebridge Diagnostic Services - ATTO Technology FibreBridge 2100R Software Manual

Atto technology fibrebridge 2100r bridges: software guide
Hide thumbs Also See for FibreBridge 2100R:
Table of Contents

Advertisement

ATTO Technology, Inc.

Chapter 1: ATTO FibreBridge Services

This document defines the ATTO FibreBridge services and applications available to customers including:
ATTO FibreBridge configuration
ATTO FibreBridge maintenance
ATTO FibreBridge diagnostics
System diagnostics
These services are available through the RS-232 interface and Ethernet. In the future, the services may
be accessed through Fibre Channel. Examples in this document will be shown using the RS-232
interface.

ATTO FibreBridge Configuration Services

ATTO FibreBridge configuration services allow configuration of all ATTO FibreBridge interfaces and
general firmware operational parameters. The following is an abbreviated list of ATTO FibreBridge
Configuration Services:
Serial Port Configuration
Fibre Channel Port Configuration
SCSI Port 1 & 2 Configuration
Firmware Operation

ATTO FibreBridge Maintenance Services

ATTO FibreBridge maintenance services allow the performance of basic maintenance services on the
ATTO FibreBridge. The following is an abbreviated list of ATTO FibreBridge maintenance services:
SCSI Enclosure Services Information (temperature, P/S status, etc.)
FibreBridge Identification (revision levels, configurations, etc.)
Downloading new firmware
Issuing SCSI bus resets
Issuing Fibre Channel resets (LIPs, etc.)
Restarting firmware (causes power-on diagnostics to be executed)

ATTO FibreBridge Diagnostic Services

ATTO FibreBridge Diagnostic Services allow diagnostic tasks to be performed on the ATTO FibreBridge.
The diagnostics should aid in validating the correct operation of an ATTO FibreBridge. The following is an
abbreviated list of ATTO FibreBridge diagnostic services:
Viewing Internal Error Log

System Diagnostic Services

System Diagnostic Services allow the use of the ATTO FibreBridge in determining the correct operation of
the complete system or isolating system level problems. The following is an abbreviated list of System
Diagnostic Services:
Show SCSI Device Information
Show Fibre Channel Device Information
Show I/O Statistics
Domain Validation
ATTO Technology, Inc.
1
- -
ATTO FibreBridge Software Manual

Advertisement

Table of Contents
loading

Table of Contents