Monitor Storage, Configurations; Monitor Vtl Page - ATTO Technology FastStream VT 5700 Installation And Operation Manual

6.0 Monitor Storage, Configurations

You may monitor storage and determine the performance of drives attached to the FastStream VT using the
ExpressNAV VTL manager.
If you have set up at least one Virtual Tape Library
(refer to Configure Virtual Tape
monitor various aspects of your storage and the VT
and view various metrics to measure performance for
physical drives attached to the FastStream during
normal system operation and drive initialization and
verification.
CAUTION CAUTION
New performance data is updated every 60
seconds which impacts performance
slightly, even if you minimize the browser
window. Exit the ExpressNAV VTL
manager completely whenever you need
maximum performance.

Monitor VTL page

The Monitor VTL page is the first page you see when
you open the ExpressNAV VTL manager after setting
up at least one VTL. If you have not created a VTL or
if you have deleted all VTLs associated with this
FastStream, the body of the page is blank.
Each VTL has its own tab. Information includes RAID
level, RAID status, capacity, the Fibre port and LUN to
Exhibit 6.0-1 The ATTO FastStream VT Monitor VTL page.
15
ATTO Technology Inc. FastStream VT Installation and Operation Manual
on page 9.), you may
Email notification of errors allows the FastStream VT
to send an Email message to you, a network
administrator or other users when certain events
occur. Refer to Remote System Monitoring
19.
The FastStream VT collects various metrics to
measure performance for physical drives attached to
the FastStream during normal system operation and
drive initialization. Refer to
21
SES data may also be available for enclosures
attached to the FastStream. Refer to
Services (SES) on page 23.
which the VTL is mapped, the element, element type,
its bar code and whether or not the element is write
protected.
To get further information or to manage the VTL,
select the menu items on the left side of the screen. To
return to this screen at any time, click VTL.
on page
Drive Diagnostics on page
SCSI Enclosure