COOK Medical Rhapsody H-30 User Manual page 34

Frequency Bar
• Function: Displays pulse frequency in Hertz.
• Operation: Touch the bar to highlight orange and adjust pulse frequency with the adjustment
controls.
Preset Buttons
• Function: Stores a power parameter or jumps to a stored power parameter.
• Operation - Store a Power Parameter: Touch the S button and then touch a numbered preset
button to store the power parameters that are currently displayed.
• Operation - Jump to a Power Parameter: Touch a preset button (an active preset button will be
dark gray with a white number, as shown for preset #1) to jump to a stored power parameter.
Adjustment Controls
• Function: Adjust the setting that is highlighted orange: pulse energy, frequency, or visual aiming
beam intensity.
• Operation: Touch the up arrow to increase the setting.
• Operation: Touch the down arrow to decrease the setting.
Information Bar
• Function: Displays simple instructions, system status, and error messages.
Pulse Width Toggle Button
• Function: Toggles between Short and Long pulse width modes.
Standby Button
• Function: Signals that the system is in "Standby" mode with a yellow bar and icon.
• Operation: Touch the button to return to "Standby" mode.
Visual Aiming Beam Button
• Function: Adjusts the intensity of the visual aiming beam with the adjustment controls when
they are highlighted orange.
• Operation: Touch the button to toggle on or off. The icon will be white when on and gray when
off.
Ready Button
• Function: Signals that the system is in "Ready" mode with a green bar and icon.
• Operation: Touch the button to enter "Ready" mode.
Cook Medical © 2019
Return to Table of Contents Return to Table of Contents
Chapter 5
Operation
1-33