Monitored Data - ABB RELION 611 Series Technical Manual

Section 4
Protection functions
Table 223: HIBPDIF Non group settings (Basic)
Parameter
Operation
Table 224: HIBPDIF Non group settings (Advanced)
Parameter
Reset delay time
Table 225: HICPDIF Group settings (Basic)
Parameter
Operate value
Minimum operate time
Table 226: HICPDIF Non group settings (Basic)
Parameter
Operation
Table 227: HICPDIF Non group settings (Advanced)
Parameter
Reset delay time
4.3.1.9
226
Values (Range) Unit
1=on
5=off
Values (Range) Unit
0...60000 ms
Values (Range) Unit
1.0...200.0 %In
20...300000 ms
Values (Range) Unit
1=on
5=off
Values (Range) Unit
0...60000 ms

Monitored data

Table 228: HIAPDIF Monitored data
Name
START_DUR
HIAPDIF
Step Default
1=on
Step Default
10 20
Step Default
1.0 5.0
10 20
Step Default
1=on
Step Default
10 20
Type Values (Range)
FLOAT32 0.00...100.00
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
1MRS757454 D
Description
Operation Off / On
Description
Reset delay time
Description
Operate value, percentage of the nominal
current
Minimum operate time
Description
Operation Off / On
Description
Reset delay time
Unit Description
% Ratio of start time /
operate time
Status
Technical Manual
611 series