Signals; Settings - ABB RELION 611 Series Technical Manual

1MRS757454 D
3.5.1.3
3.5.1.4
Table 30: Time format
Parameter Values (Range)
Time format
Date format
Table 31: Non group settings
Parameter Values (Range)
Synch source
PTP domain ID
PTP priority 1
PTP priority 2
PTP announce mode
611 series
Technical Manual
time. As no reboot is necessary, the time synchronization starts immediately after the
IRIG-B sync source is selected and the IRIG-B signal source is connected.
IRIG-B time synchronization requires a COM card with an IRIG-B
input.

Signals

Table 29: GNRLLTMS output signals
Name
ALARM
WARNING

Settings

Unit
1=24H:MM:SS:MS
2=12H:MM:SS:MS
1=DD.MM.YYYY
2=DD/MM/YYYY
3=DD-MM-YYYY
4=MM.DD.YYYY
5=MM/DD/YYYY
6=YYYY-MM-DD
7=YYYY-DD-MM
8=YYYY/DD/MM
Unit
0=None
1=SNTP
2=Modbus
3=IEEE 1588
5=IRIG-B
0...255
0...255
0...255
1=Basic IEEE1588
2=Power Profile
Type
BOOLEAN
BOOLEAN
Step Default
1=24H:MM:SS:M
S
1=DD.MM.YYYY
Step Default
1=SNTP
1 0
1 128
1 128
1=Basic IEEE1588
Section 3
Basic functions
Description
Time synchronization alarm
Time synchronization warning
Description
Time format
Date format
Description
Time synchronization source
The domain is identified by an integer, the
domainNumber, in the range of 0 to 255.
PTP priority 1, in the range of 0 to 255.
PTP priority 2, in the range of 0 to 255.
PTP announce frame mode
57