Settings - ABB RELION 611 Series Technical Manual

Section 8
Control functions
8.2.8
Table 471: DARREC Non group settings (Basic)
Parameter
Operation
Reclosing operation
Close pulse time
Reclaim time
Terminal priority
Synchronisation set
Auto initiation cnd
Tripping line
Fourth delay in SOTF
First reclose time
Second reclose time
Third reclose time
Fourth reclose time
Fifth reclose time
Table continues on next page
434
Table 470: DARREC Output signals
Name
OPEN_CB
CLOSE_CB
CMD_WAIT
INPRO
LOCKED
PROT_CRD
UNSUC_RECL
AR_ON
READY
ACTIVE

Settings

Values (Range) Unit
1=on
5=off
1=Off
2=External Ctl
3=On
10...10000 ms
100...1800000 ms
1=None
2=Low (follower)
3=High (master)
0...127
1=Not allowed
2=When sync fails
3=CB doesn't close
4=Both
0...63
0=False
1=True
0...300000 ms
0...300000 ms
0...300000 ms
0...300000 ms
0...300000 ms
Type Description
BOOLEAN Open command for circuit breaker
BOOLEAN Close (reclose) command for circuit breaker
BOOLEAN Wait for master command
BOOLEAN Reclosing shot in progress, activated during dead
time
BOOLEAN Signal indicating that AR is locked out
BOOLEAN A signal for coordination between the AR and the
protection
BOOLEAN Indicates an unsuccessful reclosing sequence
BOOLEAN Autoreclosing allowed
BOOLEAN Indicates that the AR is ready for a new sequence,
i.e. the CB_READY input equals TRUE
BOOLEAN Reclosing sequence is in progress
Step Default
1=on
1=Off
10 200
100 10000
1=None
1 0
2=When sync fails
1 0
0=False
10 5000
10 5000
10 5000
10 5000
10 5000
1MRS757454 D
Description
Operation Off/On
Reclosing operation (Off, External Ctl /
On)
CB close pulse time
Reclaim time
Terminal priority
Selection for synchronizing requirement
for reclosing
Auto initiation condition
Tripping line, defines INIT inputs which
cause OPEN_CB activation
Sets 4th delay into use for all DEL_INIT
signals during SOTF
Dead time for CBB1
Dead time for CBB2
Dead time for CBB3
Dead time for CBB4
Dead time for CBB5
Technical Manual
611 series