Settings; Monitored Data - ABB RELION 611 Series Technical Manual

Section 3
Basic functions
3.16.2.4
3.16.2.5
88
Table 64: SCHLCCH3 output signals
Parameter Values (Range) Unit
CH3LIV True
False
LNK3LIV Up
Down

Settings

Table 65: Port mode settings
Parameter Values (Range) Unit
Port 1 Mode Off
On
Port 2 Mode Off
On
Port 3 Mode Off
On

Monitored data

Monitored data is available in six locations.
• Monitoring/Communication/Ethernet/Activity/CH1LIV
• Monitoring/Communication/Ethernet/Activity/CH2LIV
• Monitoring/Communication/Ethernet/Activity/CH3LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK1LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK2LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK3LIV
Step Default Description
Status of Ethernet channel X3/LAN.
Value is "True" if the port is receiving
Ethernet frames. Valid only when
Redundant mode is set to "None" or port
is not one of the redundant ports (LAN A
or LAN B).
Link status of Ethernet port X3/LAN.
Step Default Description
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN
B) .
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN B).
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN B).
1MRS757454 D
Redundant
Redundant
Redundant
611 series
Technical Manual