Signals; Settings; Monitored Data - ABB RELION 611 Series Technical Manual

Section 5
Protection related functions
5.4.6
5.4.7
Table 354: ESMGAPC Group settings (Advanced)
Parameter
Motor standstill A
Table 355: ESMGAPC Non group settings (Basic)
Parameter
Operation
5.4.8
324
operator can now restart the motor. A new emergency start cannot be made until the
10 minute time-out has passed or until the emergency start is released, whichever
takes longer.
The last change of the emergency start output signal is recorded.

Signals

Table 352: ESMGAPC Input signals
Name
I_A
I_B
I_C
BLOCK
ST_EMERG_RQ
Table 353: ESMGAPC Output signals
Name
ST_EMERG_ENA

Settings

Values (Range) Unit
0.05...0.20 xIn
Values (Range) Unit
1=on
5=off

Monitored data

Table 356: ESMGAPC Monitored data
Name
T_ST_EMERG
ESMGAPC
Type Default Description
SIGNAL 0 Phase A current
SIGNAL 0 Phase B current
SIGNAL 0 Phase C current
BOOLEAN 0=False Block signal for activating the blocking mode
BOOLEAN 0=False Emergency start input
Type Description
BOOLEAN Emergency start
Step Default
0.01 0.12
Step Default
1=on
Type Values (Range)
Timestamp
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
1MRS757454 D
Description
Current limit to check for motor standstill
condition
Description
Operation Off / On
Unit Description
Emergency start
activation timestamp
Status
Technical Manual
611 series