Section 3
Basic functions
3.4.2
50
Functionality
The programmable LEDs reside on the right side of the display on the LHMI.
GUID-E15422BF-B3E6-4D02-8D43-D912D5EF0360 V1 EN
Figure 12:
Programmable LEDs on the right side of the display
All the programmable LEDs in the HMI of the protection relay have two colors, green
and red. For each LED, the different colors are individually controllable.
Each LED has two control inputs, ALARM and OK. The color setting is common for all
the LEDs. It is controlled with the Alarm colour setting, the default value being "Red".
The OK input corresponds to the color that is available, with the default value being
"Green".
Changing the Alarm colour setting to "Green" changes the color behavior of the OK
inputs to red.
The ALARM input has a higher priority than the OK input.
1MRS757454 D
REF611
Overcurrent
Earth-fault
Phase unbalance
Thermal overload
AR sequence in progress
Disturb.rec.trigged
Trip circuit failure
Breaker failure
611 series
Technical Manual