ABB RELION 611 Series Technical Manual page 47

1MRS757454 D
Parameter Values (Range)
Local viewer
Local operator
Local engineer
Local administrator
1) Authorization override is disabled, communication tools ask password to enter the protection relay
2) Authorization override is enabled, communication tools do not need password to enter the protection relay, except for WHMI which always
requires it
3) Authorization override is disabled, LHMI password must be entered
4) Authorization override is enabled, LHMI password is not asked
Table 12: Binary input settings
Parameter Values (Range)
Threshold voltage
Input osc. level
Input osc. hyst
1) For Chinese configurations 78
Table 15: Binary input settings in card location Xnnn
Value
1)
Name
2)
Input m filter time
Input m inversion
1) Xnnn = Slot ID, for example, X120, X130, as applicable
2) m = For example, 1, 2, depending on the serial number of the binary input in a particular BIO or AIM card
611 series
Technical Manual
Unit
Unit
16...176 Vdc
2...50 events/s
2...50 events/s
Table 13: Binary input signals in card location Xnnn
Name
1)2)
Xnnn-Input m
1) Xnnn = Slot ID, for example, X120, X130, as applicable
2) m =For example, 1, 2, depending on the serial number of the binary input in a particular BIO or AIM card
Table 14: Binary output signals in card location Xnnn
Name
1)2)
Xnnn-Pmm
1) Xnnn = Slot ID, for example, X100, X130, as applicable
2) Pmm = For example, PO1, PO2, SO1, SO2, as applicable
Unit
5...1000 ms
0= False
1= True
Step Default
0
0
0
0
Step Default
2
1)
16
1 30
1 10
Type Description
See the application manual for terminal
BOOLEAN connections
Type Default
BOOLEAN 0=False
Step
Section 3
Basic functions
Description
Set password
Set password
Set password
Set password
Description
Binary input threshold voltage
Binary input oscillation suppression
threshold
Binary input oscillation suppression
hysteresis
Description
See the application
manual for terminal
connections
Default
5
0=False
41