5. Close both fan housing latches at the same time. The housing will position and secure itself to the
chassis (see Letter B).
Airflow
6. Reinstall all system fans into the fan housing.
•
Orient the system fan so that the airflow symbol atop the fan is pointing to the back of the
system.
•
Gently squeeze together the finger grips atop of the system fan and insert it into the fan housing.
•
Push down on the fan until fully seated and release it. The fan should be locked in place.
•
Repeat steps for all six fans.
Intel® Server System M70KLP Family Service Guide
Airflow
indicator
Figure 25. System Fan Placement Orientation Features
Airflow
Indicator
Figure 26. System Fan Installation
Fan Interface
Connector to
Server board
Airflow
26