Table of Contents
Advertisement
4. Install the rails one at a time to the back and front posts of the rack or cabinet.
•
Position the Rear Bracket along the outside of the rear post and push pins into the post from the
back (see "Rear Bracket" steps 1 and 2).
•
Rotate pin to lock rail to post.
•
Extend the rail forward to install the front mounting bracket to the front post.
•
Insert Front Bracket pins through the backside of the front post and lock them in place (see "Front
Bracket" steps 3 and 4).
•
Repeat for the second rail.
Caution: To prevent systems from falling within the rack or cabinet causing damage to the system and/or rail
from occurring, ensure that both rails are securely attached to the posts and that each rail is mounted
identically to the same mounting hole locations on each post. Installed rails for a given system must be
parallel and at the same height within the rack.
Intel® Server System M70KLP Family Service Guide
Figure 31. Rail Kit - Rail Installation to Mounting Posts
30
Advertisement
Table of Contents
