2.3.2.2
Fan Housing Installation
1. (If removed) Reinstall one or both fan housing mounting bracket(s) to the chassis sidewall.
Note: Each mounting bracket is stamped (L) or (R) to identify which side of the chassis the bracket
mounts to.
•
Match the bracket identifier (L) or (R) to the proper side of the chassis.
•
Align the two key holes of the mounting bracket to the mounting studs on the chassis
sidewall.
•
Place the mounting bracket over the mounting studs and push the bracket down over the
alignment pin on the chassis base until seated (see Letter A).
•
Tighten the blue thumbscrew to secure the mounting bracket (see Letter B).
Intel® Server System M70KLP Family Service Guide
Figure 21. Fan Housing Mounting Bracket Installation
Figure 22. System Fan Housing – Open Latches to Install
24