System Top Cover Installation; Figure 12. Chassis Intrusion Switch Cable To Server Board; Figure 13. Open Top Cover Latch - Intel M70KLP Series Service Manual

9. Orient the latch of chassis intrusion cable connector to the cut-out keyed side of the 4-pin connector
on the server board (see above figure).
10. Carefully attach the cable to the server board connector until fully seated and locked in place.
2.2.2

System Top Cover Installation

Note: The system top cover will not install unless the air duct and air duct lock bar are properly installed and
locked in place.
1. Lift the top cover latch to its fully open position.
19
Intel® Server System M70KLP Family Service Guide

Figure 12. Chassis Intrusion Switch Cable to Server Board

Figure 13. Open Top Cover Latch