Figure 70. Standard System - Back Panel Features; Figure 71. Gpu Enabled System - Back Panel Features - Intel M70KLP Series Service Manual

Hide thumbs Also See for M70KLP Series:
Table of Contents

Advertisement

The low-profile air duct used in the GPU enabled system option will accommodate 1U processor heat sinks
and allow support for four half-height/half-length PCIe add-in cards on the server board, one (1) GPU add-in
card (Full-Height Full-Length Double-wide) + one (1) Full-Height Half-Length PCIe add-in card from each
riser card assembly. The top side of the air duct has mounting features for an M.2 interface board capable of
supporting up to two (2) SATA M.2 SSDs, and support for one (1) Intel® RAID Maintenance Free Backup
(RMFBU) module.
The following illustrations identify the features found on the back panel for both the Standard and GPU
enabled system options. All I/O connectors, buttons, LEDs, OCP support, and power supply bays will be
common between the two system options.
The base Standard system option includes support for up to six (6) server board mounted PCIe* Gen3 add-in
cards. Riser card options adds support for an additional six (6) PCIe Gen 3 add-in cards
PCIe – FH, HL
PCIe – FH, HL
PCIe – FH, HL
OCP 3.0 Add-in
card bay
Riser #0
The GPU enabled system option supports up to four (4) server board mounted PCIe Gen 3 add-in cards. With
two PCIe riser cards, the system will also support up to two (2) Full-Height Full-Length Double-Wide GPU
add-in cards + two (2) Full-Height Half Length PCIe Gen 3 add-in cards
PCIe – FH, FL, DW
PCIe – FH, HL
ID Button/LED
System
(BMC Reset)
Reset
Button
Riser #0
1
Some riser card add-in slots require that PCIe bus lanes be cabled to the riser cards from one or more of the PCIe
slim-line connectors on the server board.
Intel® Server System M70KLP Family Service Guide
OCP Hot Plug
Button
(Not Supported)
Server Board mounted
add-in card Slots

Figure 70. Standard System - Back Panel Features

BMC Serial Port
(Not Supported)
Server Board mounted
add-in card slots
Figure 71. GPU Enabled System – Back Panel Features
PCIe – HH, HL
PCIe – HH, HL
PCIe – HH, HL
VGA
Mgmt.
Port
USB
3.0
1
.
PCIe – FH, FL, DW
PCIe – FH, HL
Serial Port
Riser #1
(Not Supported)
F
1
.
1
0
Riser #1
1
0
Power Supply
Modules
56

Advertisement

Table of Contents
loading

Table of Contents