Caution: The server system is very heavy. It is highly recommended that two or more people and/or the aid
of a mechanical lift be used to install the server into the rack or cabinet.
5. Install the server into the rails.
•
Fully extend the middle rail segment out from each installed rail (see number 1).
•
Position the system so that each inner rail segment on the side of the system is aligned to a rail
extending from the rack.
•
Insert the system into each middle rail segment and push it into the rack until it stops
(see number 2).
•
Slide (forward or back) the Blue release tab on each inner rail segment and push the system the
remaining length until fully installed (see number 3).
•
Using the lock screws on each system handle, lock the server to the front posts.
31
Intel® Server System M70KLP Family Service Guide
Figure 32. Rail Kit - Server Installation into Rails