Figure 67. Front Control And I/O Panels; Table 3. Front Panel Button And Led Operation - Intel M70KLP Series Service Manual

Integrated within the front system handles are a control panel (Left) and I/O panel (Right), as shown below.
Power Button / LED
System ID Button /
LED
+
(BMC Reset Button – Press
and hold 6 seconds)
Button / LED
Power button with LED
Unit ID Button with LED / BMC
RST button
System fault indicator
Memory fault indicator
Fan fault indicator
Power supply fault indicator
CPU / Memory thermal fault
indicator
Network status LED
Intel® Server System M70KLP Family Service Guide
Memory Status
System
Status LED
Power
Supply
CPU/Memory
Status LED
Thermal Fault

Figure 67. Front Control and I/O Panels

Table 3. Front Panel Button and LED Operation

Description
The power LED is green when power is on.
The power LED is orange when the system is in standby.
Press the button for 4 seconds to force a system shutdown.
The button is used to turn on/off the Blue UID LED.
Press and hold the button for 6 seconds to force the BMC to restart.
LED is OFF when system is in a normal state
LED is steady RED if the system is in a fault condition.
LED will Blink RED when an alarm is reported.
LED is OFF when system is in a normal state
LED is steady RED if memory is in a fault condition.
LED will Blink RED when an alarm is reported.
LED is OFF when system is in a normal state
LED is steady RED with a fan RPM read failure.
LED Blinks RED in the case of RPM read exception.
LED is OFF when system is in a normal state
LED Is steady RED when a power supply fails.
LED Blinks RED when the power supply is abnormal.
LED is OFF when system is in a normal state
LED is steady RED when the CPU or memory is overheated.
LED is steady green or blinks green when the network connection is normal.
LED Is off in the case of no network connection.
*Note: It only indicates the working status of the OCP card (4S).
Fan Status
LED
LED
Network
Status LED
LED
VGA Connector
USB 3.0 Port
USB 2.0 Port
54