2.3.1
Cable Management Brackets
Mounted to each chassis sidewall are two cable management brackets as shown in the following figure.
Open bracket to install cables
2.3.2
System Fan Housing – Removal / Installation
To route cables to/from the area behind the front drive bay, the system fan housing must be removed from
the chassis. The fan housing is modular allowing for tool-less removal and installation.
2.3.2.1
Fan Housing Removal
1. (If installed) Remove the system air duct from the chassis (see
2. Remove all 6 system fans from the fan housing.
•
Using the finger grips atop of each system fan, squeeze and pull each fan up from the housing.
Intel® Server System M70KLP Family Service Guide
Cables routed and secured
Figure 17. Internal Cable Management
Figure 18. System Fan Removal
Close bracket to secure cables
Section
2.1.2).
22