System Fan Connectors; Figure 12. Cooling Fan Configuration For Intel ® Server Board S5500Bc - Intel E80367-001 Product Specification

®
Intel Server System SC5650BCDP TPS
Figure 12. Cooling Fan Configuration for Intel
®
The Intel Server System SC5650BCDP is engineered to provide sufficient cooling for all
internal components of the server. The cooling subsystem is dependent upon proper airflow.
The designated cooling vents on both the front and back of the chassis must be left open and
must not be blocked by improperly installed devices. All internal cables must be routed in a
manner that does not impede airflow, and ducting provided for CPU cooling must be installed.
Active heatsinks for CPUs incorporate a fan to provide cooling. The Intel
SC5650BCDP is engineered to work with processors that have an active heatsink solution.
Heatsink thermal solutions are sold separately, be sure that you use one that is rated for the
wattage of your processor. Proper installation of the processor cooling solution is required for
circulating air toward the rear of the chassis (toward I/O connectors).
4.3.1

System Fan Connectors

®
The Intel Server System SC5650BCDP supports three system fans. The Intel
S5500BC supports five SSI compliant 4-pin fan connectors. The two 4-pin fan connectors are
for processor cooling fans: CPU_1 fan (J3K1) and CPU_2 fan (J7K2). The three 4-pin fan
connectors are for system fans system fan 1(J3K2), system fan 2(J8K3), and system fan 3
(J8B4).
Revision 1.0
Fan
Rear Chassis Fan
HDD Bay Fan
PCI Zone fan
Intel order number: E80367-001
®
Server Board S5500BC
Connect to fan connector
System Fan 3
System Fan 2
System Fan 1
Cooling Sub-System
®
Server System
®
Server Board
31