5.7.2
Backplane Installation
1. Locate and unpack the replacement backplane.
2. Carefully align and place the two mounting keyholes of the backplane over the mounting studs on
the drive bay (see Letter A).
3. Ensure no cables are laying beneath the backplane. Then, gently push down on the backplane until
securely seated.
4. Push in and turn the blue thumbscrew clockwise to secure the backplane to the drive bay
(see Letter B).
5. Ensure proper orientation and re-attach all cables to the backplane.
6. Reinstall all drives to the front drive bay (see
7. Reinstall the system fan housing (see
8. Reinstall system air duct (see
9. Reinstall system top cover (see
71
Intel® Server System M70KLP Family Service Guide
Figure 91. Backplane Installation
Section
Section
2.3.2.2).
Section
2.2.1).
Section
2.2.2).
5.5).