Confirm The Ip Address And Test The Audio - CyberData 011395 Operation Manual

2.2.4 Confirm the IP Address and Test the Audio

2.2.4.1 Reset Test Function Management (RTFM) Button
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) button
speaker's IP Address and test that the audio is working.
Note
To announce a speaker's current IP address, press and release the RTFM button within a five
second window.
Note
Note
Operations Guide
(Figure
Using the RTFM button will lock the digital volume level to 4 and disable the analog volume
control dial.
Figure 2-9. RTFM Button
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM button for longer than five seconds will restore the speaker
to the factory default settings.
931251H
Installing the InformaCast Enabled Speaker
2-9) on the speaker face to announce and confirm the
Device Configuration
RTFM button
CyberData Corporation
17