Confirm The Ip Address And Test The Audio - CyberData InformaCast 011396 Operation Manual

•

2.2.4 Confirm the IP Address and Test the Audio

2.2.4.1 Reset Test Function Management (RTFM) Button
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) button
speaker's IP Address and test that the audio is working.
To announce a speaker's current IP address, press and release the RTFM button within a five
second window.
Note
Note
Operations Guide
The Link LED blinks to indicate network traffic.
(Figure
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 192.168.1.23 if a DHCP server is not present).
Pressing and holding the RTFM button for longer than five seconds will restore the speaker
to the factory default settings.
932010A
Installing the InformaCast Enabled Speaker with Talk-Back
2-8) on the speaker face to announce and confirm the
Figure 2-8. RTFM Button
Device Configuration
RTFM button
CyberData Corporation
17