Confirm The Ip Address, Test The Audio, And Check The Volume - CyberData 011182 Operation Manual

2.2.12 Confirm the IP Address, Test the Audio, and Check the Volume

2.2.13 Reset Test Function Management (RTFM) Button
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) button
speaker's IP Address, test that the audio is working, and check the volume.
To announce a speaker's current IP address:
1. Press and release the RTFM button within a five second window
2. When you hear the IP address announcement, check the speaker volume.
Note
Note
Operations Guide
(Figure
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM button for longer than five seconds will restore the speaker
to the factory default settings.
1.The Restore Factory Defaults and Announce IP Address functions will only work once the
speaker has successfully retrieved its configuration file from the InformaCast Server.
2-8) on the speaker face to announce and confirm the
Figure 2-8. RTFM Button
930463C
Installing the Singlewire-enabled Speaker
Set Up and Test the Speaker
1
RTFM button
1
.
CyberData Corporation
29