CyberData 011395 Operation Manual page 45

2. On the Device page, you may enter values for the parameters indicated in
Note
Web Page Item
Volume Settings (0-9)
Disable Volume Control Dial
SIP Volume
Multicast Volume
Ring Volume
Sensor Volume
Volume Boost:
No Volume Boost
+4dB
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-11. Audio Page Parameters
Description
Select this option to disable the volume control dial and enable digital
volume control settings.
Set the speaker volume for a SIP call. A value of 0 will mute the speaker
during SIP calls.
Set the speaker volume for multicast audio streams. A value of 0 will mute
the speaker during multicasts.
Set the ring volume for incoming calls. A value of 0 will mute the speaker
instead of playing the ring tone when Auto-Answer Incoming Calls is
disabled.
Set the speaker volume for playing sensor activated audio. A value of 0 will
mute the speaker during sensor activated audio.
Set the Boost level to increase the volume output of the speaker. Using
Volume Boost may introduce audio clipping and/or distortion. Boost is only
recommended for use with volumes set to level 9.
Click on the Test Audio button to do an audio test. When the Test Audio
button is pressed, you will hear a voice message for testing the device
audio quality and volume.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark (
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
931251H
Installing the InformaCast Enabled Speaker
) in the following table shows which web page items will be defined
.
) appear next to some of the web page items. Move the
Device Configuration
Table 2-6.
CyberData Corporation
38