Confirm The Ip Address, Test The Audio, And Check The Volume - CyberData 011395 Operation Manual

2.2.4 Confirm the IP Address, Test the Audio, and Check the Volume

2.2.4.1 Reset Test Function Management (RTFM) Switch
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch
speaker's IP Address, test that the audio is working, and check the volume.
To announce a speaker's current IP address:
1. Press and release the RTFM switch within a five second window.
2. When you hear the IP address announcement, check the speaker volume.
Note
Note
Operations Guide
(Figure
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM switch for longer than five seconds will restore the speaker
to the factory default settings.
931251F
Installing the Singlewire InformaCast Speaker
2-13) on the speaker face to announce and confirm the
Figure 2-13. RTFM Switch
Set Up and Test the Speaker
RTFM button
CyberData Corporation
18