CyberData 011395 Operation Manual page 64

2. On the SSL page, enter values for the parameters indicated in
Note
Web Page Item
Server CAs
Client Certificate
Client CA
Test SSL Connection
Server
Port
List of Trusted CAs
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-16. SSL Configuration Parameters
931251H
Installing the InformaCast Enabled Speaker
) in the following table shows which web page items will be defined
.
Description
Use this button to select a configuration file to import.
Click Browse to select a CA certificate to import. After selecting
a server certificate authority (CA), click Import CA Certificate to
import it to the list of trusted CAs. CAs are used to validate the
certificate presented by the server when establishing a TLS
connection.
Restore Defaults will restore the default list of registered CAs
and Remove All will remove all registered CAs.
Restore Defaults will restore the default list of registered CAs
and Remove All will remove all registered CAs.
Reboots the device and applies settings and activates imported
certificates.
Click on the Toggle Help button to see a short description of
some of the web page items. First click on the Toggle Help
button, and you will see a question mark (
some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web
page item.
When doing mutual authentication this device will present a client
certificate with these parameters.
Right click and Save Link As... to get the Cyberdata CA used to
sign this client certificate.
The ssl test server address as a fully qualified domain name or in
IPv4 dotted decimal notation.
The ssl test server port. The supported range is 0-65536. SIP
connections over TLS to port 5060 will do the same.
Use this button to test a TLS connection to a remote server. This
will attempt to make a socket connection to the configured test
server and port and report the success or failure. This can be
used to debug TLS connection issues separate from SIP
registration issues.
Provides details of the certificate. After clicking on this button, the
Certificate Info Window appears. See
"Certificate Info Window".
Device Configuration
Table 2-16.
) appear next to
Section 2.3.10.1,
CyberData Corporation
57