CyberData 011395 Operation Manual page 96

4. Click on the Firmware menu button to open the Firmware page. See
CyberData InformaCast Enabled
v12.0.0
5. Click on the Browse button, and then navigate to the location of the firmware file.
6. Select the firmware file.
7. Click on the Upload button.
Note
Note
8.
Web Page Item
Current Firmware Version
Operations Guide
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-39. Firmware Page
Speaker
Do not reboot the device after clicking on the Upload button.
This starts the upgrade process. Once the InformaCast Enabled Speaker has uploaded the
file, the Uploading Firmware countdown page appears, indicating that the firmware is
being written to flash. The InformaCast Enabled Speaker will automatically reboot when the
upload is complete. When the countdown finishes, the Firmware page will refresh. The
uploaded firmware filename should be displayed in the system configuration (indicating a
successful upload and reboot).
Table 2-22 shows the web page items on the Firmware page.
Device".
Table 2-22. Firmware Parameters
Description
Shows the current firmware version.
Use the Browse button to navigate to the location of the
firmware file that you want to upload.
Click on the Upload button to automatically upload the selected
firmware and reboot the system.
931251H
Installing the InformaCast Enabled Speaker
Device Configuration
Figure 2-39.
Section 2.4.2,
CyberData Corporation
89