Configure The Multicast Parameters - CyberData 011395 Operation Manual

2.3.9 Configure the Multicast Parameters

The Multicast Configuration page allows the device to join up to ten paging zones for receiving
ulaw/alaw encoded RTP audio streams.
A paging zone can consist of one or many CyberData multicast group-enabled products. There is no
limit to how many speakers can be in a given paging zone. Each multicast group is defined by a
multicast address and port number.
Each multicast group is assigned a priority, allowing simultaneously arriving pages to be serviced
based on importance. Multicast groups are compatible with IGMP through version 3. The device
supports simultaneous SIP and Multicast.
1. Click on the Multicast menu button to open the Multicast page. See
CyberData InformaCast Enabled
Operations Guide
Figure 2-24. Multicast Page
Speaker
931251H
Installing the InformaCast Enabled Speaker
Device Configuration
Figure 2-24.
The strobe settings will
only appear if you are
using the Strobe Kit.
If you are not using the
Strobe Kit, you will not
see the strobe settings.
CyberData Corporation
52