CyberData 011395 Operation Manual page 75

2. On the Audiofiles page, enter values for the parameters indicated in
Note
Web Page Item
Available Space
Stored Messages
Stored Message 1 through 9
Audio Files
0-4
5-9
Dot
Audio Test
Enter Code
Invalid Code
Page Tone
Your IP Address is
Rebooting
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-18. Audiofiles Page Parameters
Description
Shows the space available for the user to save custom audio files if they want to change the
message when the door or sensor is triggered.
Stored Message 1 corresponds to the message played after pressing 1 on a phone keypad.
Stored Message 2 corresponds to the message played after pressing 2 on a phone keypad.
Stored Message 3 corresponds to the message played after pressing 3 on a phone keypad.
Stored Message 4 corresponds to the message played after pressing 4 on a phone keypad.
Stored Message 5 corresponds to the message played after pressing 5 on a phone keypad.
Stored Message 6 corresponds to the message played after pressing 6 on a phone keypad.
Stored Message 7 corresponds to the message played after pressing 7 on a phone keypad.
Stored Message 8 corresponds to the message played after pressing 8 on a phone keypad.
Stored Message 9 corresponds to the message played after pressing 9 on a phone keypad.
The name of the audio configuration option is the same as the spoken audio that plays on
the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
The name of the audio configuration option is the same as the spoken audio that plays on
the board (24 character limit).
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test message..." (24
character limit)
Corresponds to the message "Enter Code" (24 character limit).
Corresponds to the message "Invalid Code" (24 character limit).
Corresponds to a simple tone used for beep on initialization and beep on page (24 character
limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
931251H
Installing the InformaCast Enabled Speaker
) in the following table shows which web page items will be defined
.
Device Configuration
Table 2-18.
CyberData Corporation
68