CyberData 011395 Operation Manual page 57

2.3.8.1 Point-to-Point Configuration
When the device is set to not register with a SIP server (see
speaker to receive Point-to-Point calls by setting the dial out extension to the IP address of the
remote device. The delayed DTMF functionality is available in Point-to-Point Mode.
Note
CyberData InformaCast Enabled
Device is set to NOT register with a SiP server
Operations Guide
Receiving point-to-point SiP calls may not work with all phones.
Figure 2-23. SIP Page Set to Point-to-Point Mode
Speaker
931251H
Installing the InformaCast Enabled Speaker
Device Configuration
Figure 2-23), it is possible for the
CyberData Corporation
50