CyberData 011395 Operation Manual page 85

2. On the Autoprovisioning page, you may enter values for the parameters indicated in
Note
Web Page Item
Disable Autoprovisioning
Autoprovisioning Server
Autoprovisioning Filename
Use tftp
Verify Server Certificate
Username
Password
Autoprovisioning Autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Operations Guide
20.
The question mark icon (
after the Toggle Help button is pressed
Table 2-20. Autoprovisioning Configuration Parameters
Prevent the device from automatically trying to download a configuration file. See
Section 2.3.14.1, "Autoprovisioning"
Enter the IPv4 address of the provisioning server in dotted decimal notation.
The autoprovisioning filename is the configuration filename. The default
autoprovisioning filename is in the format of <mac address>.xml.
Supported filename extensions are .txt, and .xml. The current filename is denoted
by an asterisk at the bottom of the
characters.
A file may have any name with an xml extension. If a file name is entered, the
device will look for the specified file name, and only that file.
The device will use TFTP (instead of http) to download autoprovisioning files.
When using ssl to download autoprovisioning files, reject connections where the
server address doesn't match the server certificate's common name.
The username used to authenticate with an autoprovisioning server. Leave this
field blank to disable authentication.
The password used to authenticate with an autoprovisioning server. Leave this field
blank to disable authentication.
The reoccurring time (in minutes) the device will wait before checking for new
autoprovisioning files. Enter up to 6 digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
boot
The time of day the device will check for a new autoprovisioning file. The time must
be 6 characters in length and in HHMMSS format. An empty value will disable this
option.
Note: To use the auto update options, enable the
boot
The idle time (in minutes greater than 10) after which the device will check for a
new autoprovisioning file. Enter up to 6 digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
boot
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the web page
items. First click on the Toggle Help button, and you will see a question mark (
appear next to some of the web page items. Move the mouse pointer to hover over
a question mark to see a short description of a specific web page item.
) in the following table shows which web page items will be defined
.
Description
for more information.
Autoprovisioning
setting on the Device Page
setting on the Device Page
setting on the Device Page
931251H
Installing the InformaCast Enabled Speaker
Device Configuration
Page. Enter up to 256
Set Time with NTP Server on
page (see Table 2-6).
Set Time with NTP Server on
page (see Table 2-6).
Set Time with NTP Server on
page (see Table 2-6).
CyberData Corporation
78
Table 2-
)