Special Functions; Special Function "Erasing The Working Storage; Special Function " Display Of Operating Counter - Soyer BMK-12 W Operating Instructions Manual

5.4

Special functions

With the stud welder BMK-12 W you can call additional special functions:
Start dealing with the special functions when you are familiar with the basic functions
of the stud welder.
The stud welder must be switched off when calling special functions. In order to call
the respective special functions you have to press certain function key combinations
and keep them pressed when starting the stud welder. Switch off the stud welder by
means of the main switch to terminate the special functions.
After this, the stud welder can be restarted as described in chapter 6.
5.4.1

Special function "Erasing the working storage"

This special function serves as "RESET function" e.g. for eliminating troubles or
starting the stud welder the first time. All settings of the working storage are erased by
using this function.
To erase the working storage, please proceed as follows:
• Simultaneously press "arrow up", "arrow down", "arrow right" and "arrow left" keys
and keep them pressed.
• Switch stud welder on with main switch.
• Stop pressing "arrow up", "arrow down", "arrow right" and "arrow left" keys.
• Switch off stud welder with main switch and switch on again.
R
5.4.2

Special function " Display of operating counter"

This special function serves to display the operating counter and the equipment
number.
• Simultaneously press "arrow up" and "arrow down" keys and keep them pressed.
• Switch stud welder on with main switch.
• Stop pressing "arrow up" and "arrow down" keys.
44
BMK-12 W