Description Of Bms-9(V) Stud Welding Devices; Type Differentiation; Working Method; Product Features - Soyer BMS-9 Operating Instructions Manual

6 Description of BMS-9(V) stud welding devices

The main elements of the stud welding device and its features are described in the
following.
6.1

Type differentiation

The difference between the device types BMS-9 and BMS-9V described in this
instruction lies in the different performances of the capacitor banks and therefore in
the welding performance.
BMS-9
P01070
BMS-9V
P01071
6.2

Working method

With the SOYER® BMS-9 stud welding device, pins and threaded studs from M3 to M8
(M10 with BMS-9V and special gun) as well as many different weld fasteners made of
steel or stainless steel can be welded in accordance with DIN EN ISO 13918 (capacitor
discharge).
Welding of weld fasteners made of aluminium and brass is also possible.
The LED display makes the operator's job easier and also considerably contributes to
increasing the quality of the welded joints.
6.2.1

Product features

•
Simple selection of welding parameters using control keys
•
Automatic recognition of the mains voltage 115/230V~
•
Inverter switch-mode power supply for maximum welding capacity
•
Automatic recognition of the welding gun (gap/contact)
•
Control of the optical LED illuminated ring on the PS-9(K) welding gun
•
High capacity with compact structure and low weight
•
Automatic storage of charging voltage
•
Short charging cycles to increase productivity
•
Precise digital display of the charging voltage
•
Monitoring of all functions using a clear functional display panel
16
Designation
Order number
Operating instructions Soyer Bolzenschweißtechnik
Feature
Capacitor bank: 66,000 μF
Maximum welding stud diameter: M8
Capacitor bank: 99,000 μF
Maximum welding stud diameter:
M8 (M10 with special welding gun)